06:59AM - 23.03.'13
|
News Source: motortrend.com
|
The new 2014 Mazda6 goes without a V-6 engine, but there is an alternative that provides the relaxed muscle of a V-6's low-rev torque. An alternative that makes vastly better fuel economy. It's the Mazda6 diesel, which the company said definitely will come to the U.S. this year. It seems crazy to compare the refinement of a V-6 with the reputedly rough and vibratory nature of a four-cylinder diesel, but bear with us. For one, diesels are getting more refined -- and this is a good one. More than that, its ample torque reserve means you seldom have to wring it out just to gather a few mph. With 310 lb-ft at 2000 rpm, it'll get the job done without breaking a sweat. In Europe, we've been driving one equipped with Mazda's own six-speed automatic transmission. Compared with the 2.5-liter, I-4 gas engine version, it not only has that extra torquey shove in the mid-ranges, but it's only half a second slower to 60 mph, Mazda says. Yet, in the European fuel cycle, it goes an extra third on a gallon. The engine is unusual for a diesel because it has a compression ratio of just 14:1 -- most run to 18:1 or more. This helps keep combustion temperature low, so there's less NOx produced. Additional new diesel tech appears in the variable lift on the exhaust valves, serving the same NOx-reducing purpose while the engine is warming up. The motor can pass the MY2015 Euro tests without NOx-reduction exhaust after-treatment, reducing complexity and weight. Lower combustion shock from the low compression means more refined operation and allows an aluminium engine block instead of the iron used on most diesels, reducing the front-end weight penalty versus a gas engine. |



